FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 22 / 32

English | Assembly instructions
22
If no other accessories are fitted to
the e-bike, the right-hand connection
(4) on the BOTTOM BRACKET remains
unoccupied.
→
Make sure that the connection (4) ,
which may be free, is closed with a
cap for the BOTTOM BRACKET.
4
Step 3: Attaching the spoke magnet
In order for the drive system to func-
tion properly, the spoke magnet
(19)
must be attached at the correct
distance from the speed sensor
(17) . Note the marking on the speed
sensor.
The correct distance is:
• min. 4 mm
• max. 17 mm.
19
17
→
Place the spoke magnet (19) on a spoke on the
brake side.
→
Align the spoke magnet so that the correct
distance to the speed sensor is established. Note
the marking on the speed sensor.
→
Attach the spoke magnet by screwing in the
spoke screw
(20) with the Phillips screwdriver
PH2.
20
19
→
Perform a diagnostic test with the FAZUA Toolbox.