FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 11 / 32

Assembly instructions | English
11
4.2.2 Disassembling REMOTE FX
notice
►
Always use needle-nose pliers to pull the plugs straight out of the corresponding connection.
Be careful not to twist or bend the connectors.
►
When dismantling the REMOTE FX, work carefully so as not to damage the paint on the e-bike
frame.
Step 1: Disconnecting the REMOTE cable from the BOTTOM BRACKET
→
Pull the REMOTE connector (2) out of the centre
connector on the BOTTOM BRACKET using the
needle-nose pliers.
2
Step 2: Removing REMOTE FX from the slot
When dismantling the REMOTE FX, the presence of the adapter depends on the original
mounting method. If an adapter is available, it is removed together with the REMOTE FX and
reinstalled in the same way.
→
Carefully remove the lever of the REMOTE FX from the
frame using the REMOTE FX removing tool
(5) .
The REMOTE FX removing tool is available from
the FAZUA online shop.
If the REMOTE FX is installed in the downtube, you
can alternatively (after removing the LOCKER)
carefully push it out of its slot from the inside of
the downtube.
5
Step 3: Remove the REMOTE cable from the e-bike frame if necessary
Depending on the manufacturer-specific e-bike frame, you might have to remove the LOCKER
and the BOTTOM BRACKET in order to lead the REMOTE cable through the frame.
→
If necessary, pull the REMOTE cable out of the frame (make sure that all cable fasteners in the frame are
loosened beforehand).