FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 14 / 32

English | Assembly instructions
14
4.3.2 Disassembling REMOTE BX
notice
►
Always use needle-nose pliers to pull the plugs straight out of the corresponding connection.
Be careful not to twist or bend the connectors.
Step 1: Disconnecting the REMOTE cable from the BOTTOM BRACKET
→
Pull the REMOTE connector (2) out of the centre
connector on the BOTTOM BRACKET using the
needle-nose pliers.
2
Step 2: Dismantling REMOTE BX from handlebars
→
Loosen the REMOTE screw (REMOTE BX Screw) (1)
on the underside of the REMOTE BX with the Torx
screwdriver T10.
1
→
Slide the REMOTE BX outwards off the handlebar.
or
→
Remove the REMOTE BX from the handlebar
by bending up the mounting clip.
Be careful not to damage the cable when bending
open the fixing clip.
Step 3: Remove the REMOTE cable from the e-bike frame if necessary
Depending on the manufacturer-specific e-bike frame, you might have to remove the LOCKER
and the BOTTOM BRACKET in order to lead the REMOTE cable through the frame.
→
If necessary, pull the REMOTE cable out of the frame (make sure that all cable fasteners in the frame are
loosened beforehand).