Fayat Dynapac CC1100 VI, Instruction Manual, Page: 101 / 233

Miscellaneous
4812164501.pdf 2021-05-06
Fig. Single -point lift of the roller
1. Machine plate
2. Location of the lifting hook
1
2
Lifting the roller with a single -point lift
(Optional) (CC1100/C VI - CC1200/C VI only)
The maximum weight of the machine (5) can be
read on the machine plate (1). The maximum weight of the machine (5) can be
read on the machine plate (1).
Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment. Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment.
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
Fig. Machine plate
5. Maximum weight
5
The machine must not be lifted from the ROPS,
(Roll Over Protective Structure) if the machine is
not equipped with a single-point lift. The machine must not be lifted from the ROPS,
(Roll Over Protective Structure) if the machine is
not equipped with a single-point lift.
The machine must not be lifted from the
single-point lift if the machine is equipped with a
chip spreader. The machine must not be lifted from the
single-point lift if the machine is equipped with a
chip spreader.
Unlocking the articulation
1
3
4
2
Fig. Articulation in the open position
1. Locking arm
2. Locking pin
3. Locking stud
4. Locking lug
Remember to unlock the articulation before
operating. Remember to unlock the articulation before
operating.
Fold the locking arm (3) back and secure it in the
locking lug (4) with the stud (3). Insert the locking pin
(2) fitted with a wire, to secure the stud (3). The
locking lug (4) is located on the front frame.
87