Fayat Bomag CR 820 T Tier 4, Operating Instructions, Maintenance Instructions

Page: 76 / 130

7 Standard Operating Procedures
Operations Manual
CR 820 T
Date May 2020
Page 7-4
Inspection
Figure 7.6 - Inspection Areas
1. Before the start of each day, walk around the machine and check for the following:
a. Inspect any attachments for damage or excessive wear.
b. Inspect the radiator guard for trash buildup.
c.
Inspect the cooling system for leaks and trash buildup. Check the hoses, radiator fins, radiator
cap, and the drain areas.
d. Inspect the engine compartment for leaks and trash buildup. Check for loose or frayed wires.
e. Check the engine oil level, engine coolant level, hydraulic oil level, and the fuel level.
f. Inspect all steps, hand holds, and handrails for cleanliness.
g.
Inspect the hydraulic system for leaks and trash buildup.
h. Be sure all covers and guards are firmly in place, and inspect for damage and loose or missing
bolts.
i. Be sure all safety items (decals, guards, walkways, etc.) are in place and properly installed.
j. Verify that all decals are properly adhered to the machine, undamaged, and legible.
k.
Inspect the condition of the track or wheels, depending on the style of machine you have. Repair
or replace as needed.
l. Make sure the horn, backup alarm, lights, and other components are in proper working order.
m. Inspect the operator’s station for cleanliness. Remove all trash and dirt buildup.
2. Correct any problems before starting operation.