Fayat Bomag CR 820 T Tier 4, Operating Instructions, Maintenance Instructions

Page: 58 / 130

4 Operator Controls
Operations Manual
CR 820 T
Date May 2020
Page 4-18
Left Side Button Icons
• Warning Beacon ON/OFF (16, Figure 4.6) is
displayed adjacent to the top button (Button
#1). The Warning Beacon is turned ON or
turned OFF by pressing Button #1. A blue
icon indicates that the Warning Beacon is
OFF. A green icon indicates that the Warn-
ing Beacon is ON.
• Working Lights ON/OFF (17, Figure 4.6)
is displayed adjacent to the second from
the top button (Button #2). The Working
Lights are turned ON or turned OFF by
pressing Button #2. A blue icon indicates
that the Working Lights are OFF. A green
icon indicates that the Working Lights are
ON. The console panel illumination lights
are also active when the Working Lights
are ON .
• Low Hopper Alarm ACTIVE/DISABLED (18,
Figure 4.6) is displayed adjacent to the third
from the top button (Button #3). The Low
Hopper Alarm is turned ACTIVE or turned
DISABLED by pressing Button #3. A blue
icon indicates that the Low Hopper Alarm
is DISABLED. A green icon indicates that
the Low Hopper Alarm is ACTIVE.
• Fuel Tank Status (19, Figure 4.6) is dis-
played adjacent to the bottom button (But-
ton #24). A grey icon indicates that the Fuel
Tank Status has a fuel level of greater than
10%. A red icon indicates that the Fuel Tank
Status has a fuel level of 10% or less.
Right Side Button Icons
• Calibration Menu (machine set up) (20,
Figure 4.6) is displayed adjacent to the
top button (Button #5). Navigation to the
Main Calibration page is accomplished by
pressing Button #5.
• Diagnostics Menu (21, Figure 4.6) is dis-
played adjacent to the second from the
top button (Button #6). Navigation to the
Main Diagnostics page is accomplished by
pressing Button #6.
• Advance Functions Menu (22, Figure 4.6)
is displayed adjacent to the third from the
top button (Button #7). Navigation to the
Advance Functions Screen is accomplished
by pressing Button #7.
• Uphill Mode ACTIVE/DISABLED (23, Fig-
ure 4.6) is displayed adjacent to the bot-
tom button (Button #8). The Uphill Mode
is turned ACTIVE or turned DISABLED by
pressing Button #8. A blue icon indicates
that the Uphill Mode is DISABLED. A green
icon indicates that the Uphill Mode is AC-
TIVE.
25 26 27 28
29 30
Figure 4.10 - Lower Cursor Buttons
Lower Cursor Buttons
• ESCAPE <X> button (25) is pressed to
navigate to the previous display screen.
• LEFT <◄> button (26) is not active for this
display screen.
• UP <▲> button (27) is not active for this
display screen.
• DOWN <▼> button (28) is not active for
this display screen.
• RIGHT <►> button (29) is pressed to navi -
gate to the Main Run #2 display screen.
• HOME <O> button (30) is not active for this
display screen.