Fayat Group DYNAPAC CC224HF, Instruction Manual

Page: 96 / 174

Operation
4812159601_H.pdf 2021-01-14
Always place a parked container in a safe place
away from traffic and marked with reflectors so
that it can also be seen at night. Always place a parked container in a safe place
away from traffic and marked with reflectors so
that it can also be seen at night.
5, 6
6- Refit the protective beam on the suspension arms.
To fit the container, follow the instructions in the
reverse order.
Vibration
Manual/Automatic vibration
1
2
4
3
Fig. Control panel
1. Automatic vibration control (AVC)
2. Switch, vibration On/Off
3. Rpm switch
4. Working mode
Activate the button for the Working mode (4).
Manual or automatic vibration activation/deactivation is
selected using button (1).
In the manual position the operator has to activate the
vibration via the bottom left switch on the
forward/reverse lever (2).
In automatic mode (AVC), vibration is activated when
the speed is ≥ x km/h (... mph) and turns off at a speed
of x km/h (...mph)
Activation of vibration for the first time, as well as
disconnection of automatic vibration, are performed
with the switch (2) on the forward/reverse lever.
Note that vibration can only be activated when the
working mode (4) is activated, and when the Rpm
switch (3) for the engine is in high (HI) or Eco
mode (ECO). After 10 seconds in neutral, the
vibration is switched off and the machine drops to
low speed.
84