Fayat Group DYNAPAC CC224HF, Instruction Manual

Page: 86 / 174

Operation
4812159601_H.pdf 2021-01-14
4
5
4. Manual sprinkling
5. Auto sprinkling (AWC)
When compacting asphalt, remember to turn on the
sprinkler system (4) or (5).
Make sure that the area in front of and behind the
roller is clear. Make sure that the area in front of and behind the
roller is clear.
Release the parking brake (2). Release the parking brake (2).
Machine with gear change in separate
spring-return switch (gear position switch)
Fig. Control panel
1. Gear position switch
2. Forward/Reverse lever
2
1
Switch (1) is a spring-return gear position switch,
where gear changing take place by stepping through
the three different gear positions: Position 1, Position 2
and Position 3.
• Position 1: Used for maximum hill-climbing capacity
during vibratory compaction
• Position 2: Normal position
• Position 3: Used for maximum transport speed or for high
speed during smooth rolling without vibration
Fig. The display shows the selection in
the middle (position 1, 2 or 3)
74