Fayat Group DYNAPAC CC224HF, Instruction Manual

Page: 51 / 174

Machine description
4812159601_H.pdf 2021-01-14
Functions Functions
1. Direction indicators 1. Direction indicators
2. Driving lights 2. Driving lights
3. Full/Dipped beam 3. Full/Dipped beam
4. Parking lights 4. Parking lights
5. Horn 5. Horn
Figure. Steering column switch
(optional)
1 2
3
4
5
Function descriptions
No Designation Symbol Function No Designation Symbol Function
1 Ignition key The electric circuit is broken. 1 Ignition key The electric circuit is broken.
All instruments and electric controls are supplied with power. All instruments and electric controls are supplied with power.
Starter motor activation. Starter motor activation.
To start: Turn ignition key to the right until the display
LIGHTS UP, and wait until the displayed roller GOES OFF
and changes to the status image. To start: Turn ignition key to the right until the display
LIGHTS UP, and wait until the displayed roller GOES OFF
and changes to the status image.
2 Forward/Reverse lever NOTE: The lever must be in neutral to start the machine. The
engine will not start if the lever is in any other position.
The direction and speed are controlled with the
forward/reverse lever. Moving the lever forward moves the
roller forward, and moving it back moves the roller back.
The speed of the roller is proportional to the distance of the
lever from neutral. The further the lever is from neutral, the
higher the speed.
2 Forward/Reverse lever NOTE: The lever must be in neutral to start the machine. The
engine will not start if the lever is in any other position.
The direction and speed are controlled with the
forward/reverse lever. Moving the lever forward moves the
roller forward, and moving it back moves the roller back.
The speed of the roller is proportional to the distance of the
lever from neutral. The further the lever is from neutral, the
higher the speed.
6 Button set 6 Button set
7 Central warning indication General fault indication. See display (33) for fault description. 7 Central warning indication General fault indication. See display (33) for fault description.
8 Direction indicators Shows direction indicators activated (Activated via the
steering column switch). 8 Direction indicators Shows direction indicators activated (Activated via the
steering column switch).
9 Main beam indicator Shows main beam activated (Activated via the steering
column switch). 9 Main beam indicator Shows main beam activated (Activated via the steering
column switch).
10 Amplitude selector, high
amplitude Activation produces high amplitude. (Low amplitude is the
basic mode if the button is not activated.) 10 Amplitude selector, high
amplitude Activation produces high amplitude. (Low amplitude is the
basic mode if the button is not activated.)
39