Fayat Group DYNAPAC CC224HF, Instruction Manual

Page: 72 / 174

Machine description
4812159601_H.pdf 2021-01-14
Electrical system (version 2)
4 5
6
3
Fig. Main switchbox
1.Control unit (ECU) (A7)
2. Fuse card (A6)
3. Main relay (K2)
4. Relay, drum edge lights (K8)
5. Relay, direction indicators (K9)
6. Relay, driving lights (K10)
1
2
The machine's main switchbox (1) is located on the
rear of the operator platform. There is a plastic cover
over the distribution box and fuses.
On the plastic cover there is a 24V socket and a 12V
socket (optional).
Fig. Fuse card.
Fuse card in main switchbox
The figure shows the position of the fuses.
The table below gives fuse amperage and function. All
fuses are flat pin fuses, type C (medium).
Fuse card (A6) Fuse card (A6)
F1 Main relay (K2), 24V outlet engine
compartment(X97) 10A F9 Sprinkler pump 1 10A F1 Main relay (K2), 24V outlet engine
compartment(X97) 10A F9 Sprinkler pump 1 10A
F2 Supply, Main ECU (A7), I/O unit (A12), Display
(A13), Diagnostic socket engine (X22)* 5A F10 Sprinkler pump 2 10A F2 Supply, Main ECU (A7), I/O unit (A12), Display
(A13), Diagnostic socket engine (X22)* 5A F10 Sprinkler pump 2 10A
F3 Power group 1, Main ECU, Power for frequency
sensor 10A F11 24/12V converter (12V socket cab) 10A F3 Power group 1, Main ECU, Power for frequency
sensor 10A F11 24/12V converter (12V socket cab) 10A
F4 Power group 2, Main ECU, Terminal 15, Control
panel 10A F12 GPS receiver (DCA) (A26) 5A F4 Power group 2, Main ECU, Terminal 15, Control
panel 10A F12 GPS receiver (DCA) (A26) 5A
F5 Power group 3, Main ECU 20A F13 Process lighting (Drum edge lighting) 15A F5 Power group 3, Main ECU 20A F13 Process lighting (Drum edge lighting) 15A
F6 Power group 4, Main ECU 20A F14 DCA computer (PC) (A25) 10A F6 Power group 4, Main ECU 20A F14 DCA computer (PC) (A25) 10A
F7 24V outlet driver seat (X96), Lighting tachograph 10A F15 Direction indicators 7.5A F7 24V outlet driver seat (X96), Lighting tachograph 10A F15 Direction indicators 7.5A
F8 Power for speed sensor, Fuel pump (M13)* 10A F16 Driving lights (Pos., Full/Dipped beam) 10A F8 Power for speed sensor, Fuel pump (M13)* 10A F16 Driving lights (Pos., Full/Dipped beam) 10A
*) Only valid for CC224-384, CC2200-3800 with
Deutz engine. *) Only valid for CC224-384, CC2200-3800 with
Deutz engine.
60