Fayat Group DYNAPAC CC224HF, Instruction Manual

Page: 88 / 174

Operation
4812159601_H.pdf 2021-01-14
Pivotal steering (Optional)
1
Fig. F/R lever
1. Offset steering
2
Figure. Display
The machine must be in the operating position to
activate the pivotal steering. Use the two front buttons
(1) on the forward/reverse lever to operate the pivotal
steering.
To reset the rear drum to neutral, adjust the buttons
(1) until the display (2) shows that the machine has
aligned the drums.
The symbol for Work mode shines continuously in
neutral (drums in line)
If fault indication on the display is shown or if the
buzzer sounds, stop immediately the roller in a safe
place and shut off the Diesel engine. Check the cause
for failure and remedy, see also maintenance manual,
trouble shooting guide or engine manual.
76