Fastech Ezi-Step II Plus-E MINI, User Manual, Page: 44 / 62

www.fastech.co.kr
Other Operation Functions
44
(2) Output signal
Pin that signal is outputted is fixed on
「
Compare Out
」
of CN1 connector, the signal
shape is like as below.
(3) Output check
By using DLL program, the user can check the trigger pulse output status.
For more information, refer to
「User Manual – Communication Function」 .
The pulse is output only in the area larger than the pulse start
position value, regardless of the direction of movement.
Start location
width
cycle
OFF Status
(24V, High)
ON Status
(0V, Low)
Comp Output
(In case of Low Active)
Caution