Fastech Ezi-Step II Plus-E MINI, User Manual, Page: 19 / 62

www.fastech.co.kr
19
External Name and Function Setting of Ezi-STEPⅡ Plus-E MINI
address with switch.

Set the IP address automatically only when you do not use the default IP address. If IP is
set automatically, connect the user program (GUI) and save the IP address. And turn off the
power and set the last number of IP with switch.

When the switch is set to 0, the IP setting becomes the initial (default) value.
In the initial state, communication is not connected.

Basic IP Address : 192.168.0.xxx, Subnet Mask : 255.255.255.0, Gateway : 192.168.0.1
５－３．Ethernet Status Display LED
1) This LED indicates the Ethernet communication status.
５－４．Drive Status Display LED
Status LED Description
Disable
ST1
ST2
ST1 blinking, ST2 OFF
Enable
ST1
ST2
ST1 ON, ST2 OFF
In Motion
ST1
ST2
ST1 ON, ST2 ON
In-position
deviation
ST1
ST2
ST1 & ST2 blink alternately
Alarm
ST1
ST2
ST2 blinks as much as the alarm number
(Blinks when alarm occurs under No. 15)
Name Color Status Description
ERR Red
OFF
Normal status or Power
OFF
Single Flash Local Error
LK1/
LK2
Green
OFF Link deactivated
ON Link activated
RUN Orange Blinking In operation