Fastech Ezi-Step II Plus-E MINI, User Manual, Page: 35 / 62

www.fastech.co.kr
35
Control I/O Signal
and pin4 of CN1. 'BRAKE+' is +24V which supplied to the brake, 'BRAKE-' is an output
signal for real brake control.
The control signal is automatically output according to the Step ON / OFF status and
alarm occurrence.
This output function must be used to the Brake of current consumption is under
600[mA]/DC24V.
10) Brake for High current
This brake function is for preventing motor rotation under Step OFF status through
pertinent pin if the inverter output terminal is selected among OUT1~OUT9. The output
relation between Step ON command and Brake signal is same as
9) BRAKE+ and BRAKE- .
This signal used for the Brake that is over 600[mA]/DC24V of current consumption.
Brake, relay and diode is needed for this function and the signal connection diagram is as
follows.