60
Revision date: 12.02.16
Film Cover Installation
10. Take the remaining material and use it to cover the other side of the frame. Repeat steps to pull cover onto frame.
11. Secure cover to 111613Z144 attached to frame. Open vent to gain access to the 111613Z144 as needed. Using
the proper lifts, work from inside to secure cover to the 111613Z144 attached to the frame. (See dashed line
below.) Work down each end rafter, securing cover to the 104546 channel to side run of 111613Z144. Stretch
cover and secure to 111613Z144 (See dashed line above). Trim excess material from installed cover.
Step 11
Step 10
Step 1
1
Step 1
1
Step 10
Photo above shows 102198 spring
wire used to secure cover material
to the 104546 attached to the end
rafter.
Always fully install wire in all
channels. Wear eye protection
when installing spring!
12. Continue with the next procedure.