Fairford synergy, Programming Manual, Page: 48 / 59

SWI-SGY-USB-V05700 Description
Text in quotes refer to a Synergy parameter or function, for example "Start Time"
i-synergy = synergy Class 10 current, i-rated = synergy Class20 / Class30 current, i-motor = motor current
[ SGY1051400 SGY2070000 SGY3023400 ]
PNU Number
PNU Name
PNU Format
PNU Note
Range 0 ( 0 hex ) Off - 1 ( 1 hex ) On Default 1 ( 1 hex ) On Type Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range 0 ( 0 hex ) Off - 1 ( 1 hex ) On Default 0 ( 0 hex ) Off Type Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range 0 ( 0 hex ) Off - 1 ( 1 hex ) On Default 0 ( 0 hex ) Off Type Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range 0 ( 0 hex ) Local Touch Screen - 4 ( 4 hex ) Modbus Network Default 0 ( 0 hex ) Local Touch Screen Type Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range 0 ( 0 hex ) 0 - 65535 ( FFFF hex ) 65535 Default 0 ( 0 hex ) 0 Type Read Only
60608 ( ECC0 hex ) Displays the last Fault trip
Last Trip
16 bit unsigned
Linear Scaling ( 1 =1 )
See Trip Code Descriptions
59392 ( E800 hex )
Local Touch Screen : Control using the button on the keypad
User Programmable : Control using the terminals. Function defined in "I/O" menu
Control Method
Two Wire Control : Control using terminals. Functions fixed as shown on screen
Three Wire Control : Control using terminals. Functions fixed as shown on screen
16 bit unsigned Modbus Network : Control via remote Modbus network or remote Keypad or Modbus TCP
0 = Local, 1 = User, 2 = TwoWire,
3 = ThreeWire, 4 = Modbus
53808 ( D230 hex ) Determines if supply phase sequence is incorrect for motor rotation
L1-L2-L3 Trip On : Trips if the phase sequence is L1-L2-L3.
8 bit unsigned Off : The Unit will continue to operate normally
Binary value
53807 ( D22F hex ) Determines if supply phase sequence is incorrect for motor rotation
L1-L3-L2 Trip On : Trips if the phase sequence is L1-L3-L2.
8 bit unsigned Off : The Unit will continue to operate normally
Binary value
53804 ( D22C hex ) For safety reasons the Unit will trip during some operations if the remote start signal is active
Remote Start Trip On : Trips if the remote start signal is active when the Unit is powered up or a reset is applied.
8 bit unsigned Off : The Unit will not trip and may start unexpectedly if the start signal is accidently left active.
Binary value
MAN-SGY-012-V11 EC 5195 Fairford Electronics Ltd - Synergy Modbus RTU Programming Manual - 22nd February 2016 Page 48 of 59