SWI-SGY-USB-V05700
Description
Text in quotes refer to a Synergy parameter or function, for example "Start Time"
i-synergy = synergy Class 10 current, i-rated = synergy Class20 / Class30 current, i-motor = motor current
[ SGY1051400 SGY2070000 SGY3023400 ]
PNU Number
PNU Name
PNU Format
PNU Note
Range
7872 ( 1EC0 hex ) -20°C
-
1280 ( 500 hex ) 80°C
Default
Not Applicable °C
Type
Read Only
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read Only
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read Only
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read Only
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read Only
37632 ( 9300 hex )
STATUS INDICATION : Running
Running
On : Indicates that the unit has been given a run command and the motor is being controlled.
Off : The Unit has detected a fault and tripped
8 bit unsigned
To map to digital output refer to PNU11584-PNU11587
Binary value
37312 ( 91C0 hex )
STATUS INDICATION : Error
Error
On : Indicates that the Unit has detected a fault and has shut down.
Off : The Unit is fault free
8 bit unsigned
The fault must be cleared before a reset
To map to digital output refer to PNU11584-PNU11587
Binary value
37248 ( 9180 hex )
STATUS INDICATION : Enabled
Enabled
On : Indicates that the Unit is enabled and the motor is being controlled. Remains on when Running
Off : The Unit has detected a fault and tripped
8 bit unsigned
To map to digital output refer to PNU11584-PNU11587
Binary value
37184 ( 9140 hex )
STATUS INDICATION : Ready
Ready
On : Indicates that the Unit is healthy and ready for a start. Remains on when Running
Off : The Unit has not powered up successfully or failed to reset from a trip
8 bit unsigned
To map to digital output refer to PNU11584-PNU11587
Binary value
36544 ( 8EC0 hex )
The temperature of the internal Unit heatsink.
HeatSink Temp
The Unit will trip when the heatsink temperature exceeds 80°C.
16 bit (Highbyte=b11-b8, LowByte=b7-b0)
Ta >= 0 b12=0 Ta < 0 b12=1
The internal cooling fans will turn on if this temperature exceeds 40°C
bit12=0 [HighByte*16 + LowByte/16]
bit12=1 256-[HighByte*16 + LowByte/16]
MAN-SGY-012-V11 EC 5195
Fairford Electronics Ltd - Synergy Modbus RTU Programming Manual - 22nd February 2016
Page 30 of 59