SWI-SGY-USB-V05700
Description
Text in quotes refer to a Synergy parameter or function, for example "Start Time"
i-synergy = synergy Class 10 current, i-rated = synergy Class20 / Class30 current, i-motor = motor current
[ SGY1051400 SGY2070000 SGY3023400 ]
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) None
-
2 ( 2 hex ) Odd
Default
1 ( 1 hex ) Even
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) (Soft) Stop
-
1 ( 1 hex ) Start
Default
0 ( 0 hex ) (Soft) Stop
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read/Write
18880 ( 49C0 hex )
CONTROL COMMAND : External Trip
External Trip
On : If "External Trip" is enabled the Unit trips
Off : The Unit will not trip
8 bit unsigned
Ensure start signal is low before reset.
To map to digital input refer to PNU10944-PNU10946
Binary value
18368 ( 47C0 hex )
CONTROL COMMAND : Reset
Reset
On : The initial state required for a reset.
Off : The final state required for a reset.
8 bit unsigned
To reset pulse high and then low
To map to digital input refer to PNU10944-PNU10946
Binary value
18240 ( 4740 hex )
CONTROL COMMAND : Freeze Ramp
Freeze Ramp
On : The Soft Start Ramp is held and the Unit will take longer than the time set to start
Off : The Soft Start Ramp is not held and the Unit will start in the time set.
8 bit unsigned
If set to On this parameter will hold the Start Ramp even if "Current Irms" is less than the "Current Limit Level"
To map to digital input refer to PNU10944-PNU10946
Binary value
17920 ( 4600 hex )
CONTROL COMMAND : Start / Stop
Start/Stop
On : Starts the Unit
Off : Stops or Soft stops the Unit
8 bit unsigned
To map to digital input refer to PNU10944-PNU10946
Binary value
16128 ( 3F00 hex )
Sets the serial communications parity bit
Parity
The available parity options are None Even Odd
16 bit unsigned
Also sets the stop bits. No parity uses 2 stop bits. Odd or even parity uses 1 stop bit
0=None, 1=Even, 2=Odd
MAN-SGY-012-V11 EC 5195
Fairford Electronics Ltd - Synergy Modbus RTU Programming Manual - 22nd February 2016
Page 19 of 59