SWI-SGY-USB-V05700
Description
Text in quotes refer to a Synergy parameter or function, for example "Start Time"
i-synergy = synergy Class 10 current, i-rated = synergy Class20 / Class30 current, i-motor = motor current
[ SGY1051400 SGY2070000 SGY3023400 ]
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
1 ( 1 hex ) On
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
1 ( 1 hex ) On
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
1 ( 1 hex ) On
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
0 ( 0 hex ) Off
Type
Read/Write
PNU Number
PNU Name
PNU Format
PNU Note
Range
0 ( 0 hex ) Off
-
1 ( 1 hex ) On
Default
1 ( 1 hex ) On
Type
Read/Write
53790 ( D21E hex )
Selects trip or continue if the current limit has been active for too long
Start Current Limit Trip
On : The Unit will trip
8 bit unsigned
Off: The start will continue regardless of the motor current level
Binary value
53787 ( D21B hex )
This can be used to detect if the motor is running lightly loaded.
Low Current Trip
On : The Unit will trip. This feature is not active during soft start and soft stop.
8 bit unsigned
Off: The Unit will continue to operate regardless of motor current
Binary value
53782 ( D216 hex )
Detects if the cooling fans have failed.
Fan Trip
On : The Unit trips if the cooling fans fitted to the Unit fail.
8 bit unsigned
Off : Will continue to operate and is likely to trip on a thermal trip as the heatsink will not be sufficiently cooled
Binary value
53781 ( D215 hex )
Detects if there is a fault with operation of one or more of the internal Thyristors
Sensing Fault Trip
On : Trips if one or more of the Thyristors fails to turn on properly.
8 bit unsigned
Off : The Unit will attempt to start and run although the operation may be erratic.
Operating in this mode for prolonged periods may result in SCR failure
Binary value
53777 ( D211 hex )
Detects if there is a disconnection between the Unit output and the motor
Motor Side Phase Loss
On : Trips if there is a disconnection between the output side of the Unit and the motor
8 bit unsigned
Off : The Unit will attempt to start and run although the operation may be erratic.
Operating in this mode for prolonged periods may result in SCR failure
Binary value
MAN-SGY-012-V11 EC 5195
Fairford Electronics Ltd - Synergy Modbus RTU Programming Manual - 22nd February 2016
Page 45 of 59