Fagor DDS APS-24, Hardware Manual

Page: 7 / 406

· 7 ·
Manufacturer Fagor Automation S. Coop.
B.º San Andrés 19; C.P. 20500, Mondragón, Gipuzkoa - Spain.
We hereby declare , under our own responsibility that the product:
DESIGNATION: DRIVE
BRAND: FAGOR
PRODUCT: DDS
SAFETY COMPONENT (acc. 2006/42/EC)
consisting of the following modules and accessories:
APS-24, PS-25B4, PS-65A, XPS-25, XPS-65
RPS-80, RPS-75, RPS-45, RPS-20
AXD/SPD 1.08, 1.15, 1.25, 1.35, 2.50, 2.75, 2.85, 3.100, 3.150, 3.200, 3.250
ER+TH-
 /  , ER+TH-18/  +FAN, CM-1.75, CHOKE XPS, CHOKE RPS, BPM
MAIN FILTER 42A-A, 75A-A, 130A-A, 180A-A
FXM, FKM, FS5, FM7, FM9
Note.
Some additional characters may follow the model references indicated above. They
all comply with the directives listed here. However, compliance may be verified on the label
of the unit itself.
It complies with all applicable provisions of Directive 2006/42/EC from the European
Parliament and the Council of May 17, 2006, with regard to machinery.
It also complies with all applicable provisions of the following directives:
- Directive 2014/30/EU of the European Parliament and the Council of February 26,
2014, with regard to the approximation of the legislations of the Member States in the
area of electromagnetic compatibility.
- Directive 2014/35/EU of the European Parliament and the Council of February 26,
2014, with regard to the approximation of the legislations of the Member States in the
area of electrical material.
It complies with the following harmonized standards:
LOW VOLTAGE DIRECTIVE
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE
IEC 60204-1:2005
/A1:2008 Safety of machinery - Electrical equipment of machines -
Part 1: General requirements.
IEC 61800-5-1:2007 Adjustable speed electrical power drive systems -
Part 5-1: Safety requirements - Electrical, thermal and energy.
IEC 61800-3:2004
/A1:2011 Category C3. Adjustable speed electrical power drive systems.
Part 3: EMC requirements and specific test methods.
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems -
Part 5-2: Safety requirements - Functional.
EC DECLARATION
OF CONFORMITY