Fagor 8055 EN Programming Manual Download Page 312

Page: 312 / 482

·312·

Programming manual

CNC 8055

CNC 8055i

12.

PROBING

·M· & ·EN· M

ODELS

OFT

: V02.2

PROBE

. Ang

le me

asurin

g ca

nne

d cycl

12.8

PROBE 6. Angle measuring canned cycle

A probe placed in the spindle will be used, which must be previously calibrated by means of canned
cycles:

Tool length calibrating canned cycle.

Probe calibrating canned cycle.

The programming format for this cycle is:

(PROBE 6, X, Y, Z, B, F)

[ X±5.5 ] Theoretical coordinate, along the X axis, of the vertex of the angle to be measured.

[ Y±5.5 ] Theoretical coordinate, along the Y axis, of the vertex of the angle to be measured

[ Z±5.5 ] Theoretical coordinate, along the Z axis, of the vertex of the angle to be measured.

[ B5.5 ] Safety distance

Defines the safety distance. Must be programmed with a positive value and over 0.

The probe must be placed, with respect to the point to be measured, at a distance greater than
double this value when the cycle is called.

[ F5.5 ] Probing feedrate

It sets the probing feedrate. It must be programmed in mm/minute or inches/minute.

Summary of Contents for 8055 EN



































































































































































































































































































































































































































































































Search results

Summary of Contents for 8055 EN

Reviews:

Related manuals for 8055 EN

Brands by name

Popular brands

Fagor 8055 EN, Programming Manual

Search results

Summary of Contents for 8055 EN

Reviews:

Related manuals for 8055 EN

Brands by name

Popular brands