FabWeaver A530, User Manual

Page: 79 / 120

4
-3
Output Checking
4
Bend the flexible bed up and down to easily detach the output. In case of small models, use the scrapper provided.
Do not apply excessive force to the bed with the scrapper. The bed sheet may be damaged.
If you pull the output with force, it may be damaged because of the filament material. Thus, be careful when pulling
the output.
4 Installation of Flexible Bed
①
Align both ends of the bed with the corners, and attach them to each other.
②
Position the flexible bed in place, and put it down.
③
If the flexible bed is placed at an angle, the bed may not be leveled. Lay it down to match the floor surface.
Caution
- Any debris left on surface of the bed may cause a problem in printing.
Make sure there is nothing left on the bed before use.