FabWeaver A530, User Manual

Page: 78 / 120

Output Checking
4
-2
4
1. Output Checking
1.1 Output Separation
Insert the USB flash drive to the printer. Press the Print button, which is the first button in the default display menu.
If the following screen is displayed, it indicates that the printer is ready to print.
Caution
Hot Surface
- Without sufficient cooling, the bed is very hot. Be careful of burns.
Caution
Risk of Heavy Output
- When an output is large and heavy, it may fall while detaching the bed and you may be injured. Detach
the bed by supporting it safely.
1 Cooling of Bed
After a print is completed, wait until the bed temperature reduces to below 50°C in accordance
with the instructions on the LCD screen. Do not touch the bed or the bed handles until an instruction is displayed.
Caution
- The bed is hot. Thus, do NOT touch the bed and the output until the bed has cooled down.
- To remove the output before the bed is cooled down, press the [Cancel] button and wear protective
gloves to take it out.
2 Removal of Flexible Bed
Hold the detachable handles of the bed and lift them upwards to separate the flexible bed.
3 Separation of output
Caution
Risk of Injuries
- The scraper is sharp. Thus, be careful when using it. When separating an output, be careful NOT to be
injured by the scrapper.
- When a large size file is printed, be careful NOT to let the output collide with the inside of the printer
when removing the bed.
- Be careful when removing the printout, as fragments of filament may splatter and cause injury to your
eyes or other body parts. Wear appropriate protective equipment and remove the printouts.