FabWeaver A530, User Manual

Page: 68 / 120

UI Menu Description
2
-30
2
Smart Power Management
You can set the printer's power management.
You can set the printer's chamber preheat function. In standby, the chamber is preheated to the selected temperature
between 40 and 60 °C. If you do not want to Select Off to disable the chamber warm-up function.
Important
- The “Chamber Preheating” function is only active when a nozzle for ABS/ASA is installed.
If there is no user interaction for a period selected from 1 to 12 hours, the printer enters the sleep state. Select Off to
disable energy saving mode.
When using energy saving mode, you can set a timer to wake the printer from sleep state. The wake function can be
set to Off, Once, or Weekly, and wakes the printer in sleep state on the specified day and time.
Status Bar
The information to be displayed in Status Bar on the top of the screen can be set. Select an item to display,
press the [On] or [Off] button and press the [Save] button.