Maintenance
5
-10
5
3
If you are using a filament box, please check whether the cable connection between the machine and the
filament box is secure.
Connect Blue
Cable
<BLACK>
<BLUE>
Connect Black
Cable
Insert Tube
Insert Tube
Connect Blue Cable
Connect Black Cable
4
Check if there is any filament stuck in junction.
Note
- Please refer to 3.2 Filament Fragment Stuck in Junction at Troubleshooting
5
Separate the tube above the nozzle and check filament movement in the following order.
① Separate the tube above the nozzle.
Remove snap ring
Disassemble tube guide
TUBE HOLDER
TUBE
REVER
5
Summary of Contents for A530
