FabWeaver A530 User Manual Download

Page: 69 / 120

-31

UI Menu Description

Information

The default information of the printer can be checked. In addition, the firmware update and printer history can also be

checked.

To change the name and password of the printer, press the

[Change]

button in the Name & PW field. Enter the new

name and password and press the

[Change]

button.

Reference

- Before changing the name and password of the printer, enter the existing password.

The default password is “0000”. The setting password is used for the security function.

If a network is connected, check if there is an available firmware version to update. If so, download the latest version.

In the F/W Version field, press the

[Update]

button. Press the

[Check]

button to check if there is an available version

to update. If there is a latest version, download it to update the firmware. Once the update is completed, reboot the

printer.

Summary of Contents for A530

























































































































Search results

Summary of Contents for A530

Reviews:

Related manuals for A530

Brands by name

Popular brands

FabWeaver A530, User Manual

Search results

Summary of Contents for A530

Reviews:

Related manuals for A530

Brands by name

Popular brands