FabWeaver A530, User Manual

Page: 11 / 120

3
Before using the Machine
3. Safety Information
Connect the power cord to a properly grounded outlet that is near to the product and easily accessible.
Do NOT use or store this product in wet or humid places.
Caution
Hot Surface
- Contact with it may cause burns.
- Follow the instructions below to avoid burns.
The inside of the product may be extremely hot. Let the surface cool before handling
to avoid injuries. (Do NOT touch nozzles and bed parts when printing. They are very hot,
100
℃
or higher, and may burn your skin.)
Do NOT put any body parts or objects into the printer because the motor or bed is hot while this
product is in operation.
Do NOT touch any parts of this product except the bed when the power is on. If you need to touch
the bed while the power is on, let the bed and nozzle cool to room temperature first.
After printing is completed, follow the instructions displayed on the
LCD control panel. Do NOT touch the bed or bed handle until a instruction is displayed.
If you need to touch any part other than the bed, turn the power is off first. Unplug the
power cord and wait until the bed and nozzle cool down to room temperature.
Caution
Electric Shock
- Contact with this part may cause pain.
- Follow the instructions below to avoid pain or product damage.
Do NOT open the front and top doors when this product is in operation.
Do NOT touch any parts of this product except the bed when the power is on.
If you need to touch any part other than the bed, turn the power is off first.
Unplug the power cord and wait until the bed and nozzle cool down to room temperature.
After turning the printer off using the power switch, unplug the power cord from the outlet.
Before moving this product, disconnect all cords and cables connected to this product.
Use only the power cord provided with this product or a replacement one approved by the
manufacturer.
Do NOT put any body parts or objects into this product because the motor, bed, or nozzle moves
at high speed while this product is in operation. If hair, necklaces, small objects, etc.
fall into this product, a user may be injured or the product may be damaged.
If problems such as being caught or malfunction occur while this product is in operation,
immediately press the [Pause] or [Stop] button on the control panel (UI).