Installing Button Labels
The button assembly consists of a clear
lens cap, the label and a white diffuser.
To remove a button assembly and
replace a label:
1.
Use a small flat-blade screwdriver
to gently pry the button assembly
away from its base (see figure 39).
2.
Locate the small corner notch
on the lens cap and slide the
screwdriver between the lens cap
and the diffuser (see figure 40,
A
).
Using a rotating motion of the
screwdriver, carefully pry the two
pieces apart (
B
).
3.
Replace the label with the new
button label (
C
).
4.
Press the lens cap and diffuser
together and reinstall the button
assembly into its base (
D
).
5.
Repeat steps 1 through 4 for each
button you plan to re-label.
INTERCOM
MIC ON
1
2
3
4
IPI 104
PUSH
TO
CAL
L
SECURITY
LA
B
ADMIN
OFFICE
HELP
DESK
Figure 39.
Remove Buttons
TEXT
Separating the two-
piece button here at
the corner.
Pry the two
pieces apart.
Diffuser
Plunger
Base
Button Label
Clear Lens
Notch
A
A
B
B
C
C
D
D
Figure 40.
Replace Buttons
IPI 100 and IPI 200 Series • Button Labels
55
