Configuring an IP Device with the Configuration Utility
1.
Open the configuration utility and select one of the IP devices in the
Intercom
List
.
2.
When it is highlighted, its information is displayed in the
Selected
Intercom
panel:
Figure 24.
Configuration Utility
3.
In the
Selected
Intercom
panel, the unit administrator password and the IP addresses
associated with each of the four buttons on the intercom can be changed.
4.
Click
Apply
to save the changes.
5.
Click
Exit
to close the configuration utility.
IPI 100 and IPI 200 Series • Help Desk Software
27
