Loading Media Folders to the Media Player
See “
Encoding Guidelines
” details on encoding content for use on the JMP 9600.
The final encoded content (JPEG 2000 video, audio, and other associated data) is collectively
referred to as a DCP folder and must be loaded on the hard drive of the JMP 9600 via FTP in
order to be played.
1.
Connect a computer to the media player and start the FTP utility (see “
Starting the
FileZilla FTP Utility
” on the page
75
).
2.
Drag and drop the DCP folders (and all files within the folders) from the local site into
the
Media
folder in the remote site (see
a
on figure
62
).
TIP:
Hold down the <Shift> key to select multiple DCP folders.
1
Local site (PC)
Remote site (JMP 9600)
Figure 62.
Loading Media Files
NOTES:
•
DCP folders can be very large. The time taken to up-load depends on the
file size and the bandwidth of the network connection. Ensure that the
files have completely transferred to the media player before trying to play
them.
•
There is a delay of 10 to 15 seconds after a clip had been loaded while
the media player registers it in its database. It cannot be played during
this delay.
Once you have transferred the program material to the media player, you are ready to
play the files (see “
Play a Presentation
“ in the Operation section).
JMP 9600 Media Player • Detailed System Interaction
78
