Video Setup Dialog Boxes
The
Video
selection provides pages to set up the media player for best video performance.
Use these pages to set the number of channels the player outputs, configure the video
outputs (analog, DVI-I, or HD-SDI), set the video colorspace, and configure video synchronization.
Video mode setup dialog box
Figure 55.
Video Mode Setup Dialog Box
Channels drop-down box
— Select among the
output modes shown at right. The green bar in the
field indicates that your selection is being saved.
NOTES:
•
See
page 3
for detailed descriptions of the functions of the modes.
•
In 2-channel or 2-channel locked mode, the channels share the same clock
reference. Both channels are constrained to operate at the same resolution
and frame rate, which is set by loading a clip or playlist. The parameters of
the last clip loaded take precedence.
Timecode drop-down box
— Select among the
timecode modes shown at right.
Chase mode
— The media player stays in
sync with a received timecode signal.
Trigger mode
— The media player responds to a specific timecode signal and continues
with no further response to the ongoing timecode.
The green bar in the field indicates that your selection is being saved.
JMP 9600 Media Player • HTML Operation
52
