X2!
= HD-SDI enable state
0 = not enabled, 1 = enabled
X2@
= HD-SDI mode
“single”, “dual_422_12”, “dual_444_10“, or “dual_444_12“ or
“dual_422_hfr“
NOTES:
•
The “dual_422_hfr
”
high frame rate is a licensed option of the JMP 9600 2K model.
•
The high frame rate supports resolutions of up to 1920x1080 and 2048x1080 at 48, 50 and 60 Hz. High frame rate uses
the dual HD-SDI connection mode per SMPTE 372M. The player must be set for 2-channel-locked mode and only content
specifically encoded for the high frame rate mode plays back correctly.
X2#
= Delay
± up to 500 milliseconds
X2$
= Volume
0 (no attenuation, full volume) through –144 (full attenuation, audio
effectively muted)
X2%
= License key
32 alphanumeric digits
X2^
= License
Installed license (such as “V2HD“ or “V22K“)
X2&
= Serial port baud rate
300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, or
115200
X2*
= Parity
“none”, “even”, or “odd”
X2(
= Data bits
7 or 8
X3)
= Stop bits
1 or 2
X3!
= Serial port mode
“controlMSVPP“, “disabled“, or “passthrough”
X3@
= Ethernet port
“Eth0” or “Eth1” (for LAN port 1) or “Eth2” (for LAN port 2)
X3#
= IP address, Netmask, gateway address
###.###.###.###
X3$
= DHCP on/off status
“On“ or “Off”
X3%
= Hardware (MAC) address
##:##:##:##:##:##
X3^
= Digital Input port or Relay output port
1, 2, 3, or 4
X3&
= Level
“+“ = high level, logic 1; “–” = low Level, logic 0
X3*
= Date
In the format:
MM
/
DD
/
YYYY
where
:
MM
= month: 01 (Jan) through 12 (Dec)
DD
= day: 01 through 31
YYYY
= year: 1970 through 2037
X3(
= Time
In the format:
HH
:
MM
:
SS
where
:
HH
= hour: 00 through 23
MM
= minutes: 00 through 59
SS
= seconds: 00 through 59
X4)
= Identifier
Location or name
NOTE:
If there are spaces (•) In the identifier (such as
Theater 1
), the entire name must be enclosed in double quotation marks in the set
command (such as “Theater 1”). Quotes are not required for a single word identifer (such as
Theater
).
The identifier is always in quotes in the response.
X4!
= Memory capacity or availablility
In 1024-byte blocks
X4@
= Video mode / channel availability
1 (1-channel mode) or 2 (2-channel mode or 2-channel locked mode)
X4#
= Horizontal or vertical resolution
Horizontal
: 1280, 1920, or 2048
Vertical
: 780 or 1080
X4$
= Scan type
i (interlaced) or p (progressive)
X4%
= Frame rate
23.98, 24, 24, 29.97, 30, 48, 50, 59.94, or 60
X4^
= Player state
“playing“, “paused”, or “stopped”
X4&
= Frame count
Number of frames (total or current position)
X4*
= Percentage
Current position in a playing clip expressed as a percentage
X4(
= Temperature
nn
.
nn
°C
X5)
= Voltage sensor
“ps1•5vdc“
“ps2•5vdc“
“ps1•3.3vdc“
“ps2•3.3vdc“
“ps1•12vdc“
“ps2•12vdc“
“ps1•–12vdc“
“ps2•–12vdc“
NOTES:
•
The sensor name must be enclosed in double quotation marks as shown.
•
Positive voltage sensor names
must
not
include the positive sign (+); negative voltage sensor names
must
include the negative
sign (–).
X5!
= Voltage
±
n
.
nn
(3.3 vdc and 5 vdc sensors) or ±
nn
.
nn
(12 vdc sensors)
X5@
= Version
X5#
= Date
JMP 9600 Media Player • Programming Guide
59
