Extron electronics JMP 9600 User Manual Download | Manualshive

Page: 103 / 122

background image

Encoding and Packaging Overview

Creating content for the JMP 9600 is done in three stages: encoding, wrapping and

packaging. The Extron JPEG 200 Encoder Software performs these tasks automatically and

internally (see figure

78

). This process is provided for reference only.

a.wav

J2C

Frame

J2C

Frame

...

J2C

Frame

Image

Frame

Image

Frame

...

Image

Frame

JPEG 2000

Compressor

Encoding

MXF Wrap

Wrapping

JPEG 2000 Encoding Software

Packaging

a.mxf

DCP

Packaging

v.mxf

a.mxf

v.mxf

Asset

Map

Composite

Playlist

Packing

List

MXF Wrap

Figure 78.

JPEG 2000 Encoding Software

•

Encoding —

Each frame of source video is compressed by passing the raw pixel data

through a JPEG 2000 compressor. The compressor creates a stream of JPEG-2000-coded

frames. The parameters applied to the encoder affect the compression level and quality
of the image.
The source audio is encoded using pulse code modulation (PCM).

•

Wrapping —

The individual compressed video frames are combined into a single track

file using the Material Exchange Format (MXF). The audio is converted into a separate
MXF track file.

NOTE:

The compressed audio and video data are maintained in separate MXF files.

•

Packaging —

Additional control files, describing the format of and relationship

between the audio and video files are generated. The resulting files are collectively
known as a Digital Cinema Package (DCP) as described in the DCI specification.

Video track files

A video track file is the smallest unit of video in the system. It is an MXF container that has

all the compressed video data and associated meta-information necessary to decode and
render a piece of video (see, for example,

v.mxf

in figure

78

).

The JMP 9600 supports frame-wrapped video track files that conform to SMPTE 377M-2004
and SMPTE 422M 2006.

Audio track files

An audio track file is the smallest unit of audio in the system. It is an MXF container that has

all the PCM-encoded, uncompressed audio data and associated meta-information necessary
to recreate a piece of audio (see, for example,

a.mxf

in figure

78

).

The JMP 9600 supports frame-wrapped audio track files that conform to SMPTE 377M-2004
and SMPTE 382M-2007.

Reels

In the movie industry, it is a common practice to split a feature onto several film reels for
distribution. This concept is supported digitally by splitting a feature into several separate
files. In the digital realm, a reel is a track file (see above) that contains

either

video content

or

audio content.

JMP 9600 Media Player • Detailed System Interaction

97

«
...
101
102
103
104
105
...
»

Summary of Contents for JMP 9600



























































































































Reviews:

No comments

Related manuals for JMP 9600

m:robe MR-F20 Series

Brand: Olympus Pages: 2

Brand: Onkyo Pages: 66

Brand: Sylvania Pages: 28

Brand: Astell & Kern Pages: 56

Brand: Shiro Pages: 2

AudioImage SX9100

Brand: invotel Pages: 2

Brand: August Pages: 2

DPC-7400 Series

Brand: Daewoo Pages: 26

Brand: CEOPA Pages: 7

Brand: Power Acoustik Pages: 31

Brand: SYNOS Pages: 19

Brand: Denver Pages: 10

Brand: Memorex Pages: 46

Brand: NAIM Pages: 36

Brand: PVI Pages: 38

Brand: JVC Pages: 32

Brand: JVC Pages: 4

Brand: JVC Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands