Autostart submenu
NOTES:
•
The player must be correctly configured for the clip or playlist that you select
using the
Settings > Video submenu
, or else the player does not load the
selected clip or playlist and the LCD reports ERROR.
•
If you cannot get a clip to load, see “
Setting the clip or playlist to
autoplay and view clip info
“ in the “HTML Operation” section to view the
properties of the clip, which can help reveal the problem.
The Autostart feature sets a specified clip or playlist to automatically start playing for
channel 1 or channel 2 whenever the media player powers up and has loaded its operating
system. The Autostart submenu provides controls to select a clip or playlist and enable or
disable autostart. Enable an autostart as follows:
1.
Rotate the encoder knob to highlight the channel (1 or 2) that you want to autostart
(see figure
16
).
ENTER
2
1
5
3
Figure 16.
Autostart Submenu Flowchart
2.
Press the Enter button. The enable screen appears.
3.
Rotate the encoder to highlight the
Enable
Autostart
check box.
4.
Press the Enter button.
5.
Rotate the encoder to highlight either
Playlist
or
Clip
radio button.
6.
Press the Enter button. The radio button is selected.
NOTE:
If a clip or playlist is displayed in the field beneath the radio buttons and
you are satisfied with it, the process is complete. Press the Previous button
twice to return to the Settings submenu.
JMP 9600 Media Player • Operation
22
