Changing the Fuses
The JMP 9600 is equipped with field replaceable fuses to protect against overcurrent
damage. If one of the two power circuits fails, replace the fuses as follows:
WARNING
:
Physically disconnect
both
power cables from the player before removing
the fuse module.
CAUTION:
This unit employs double pole/neutral fusing.
1.
Unplug both power cords.
2.
With a Tweeker or other small screwdriver, gently pry the cover away from the AC
Power Input switch for the power circuit that has failed (see
a
on figure
81
).
NOTE:
The cover does not separate from the power block but hangs in place.
INPUT
: 100-240V
AC, 0.4-1A, 50/60HZ
USE ONL
Y: F2 AH 240V FUSES.
INPUT
: 100-240V
AC, 0.4-1A, 50/60H
Z
USE ONL
Y: F2 AH 240V FUSES.
INPUT
: 100-240V
AC, 0.4-1A, 50/60HZ
USE ONL
Y: F2 AH 240V FUSES.
INPUT
: 100-240V
AC, 0.4-1A, 50/60H
Z
USE ONL
Y: F2 AH 240V FUSES.
1
2a
2b
3
Figure 81.
Replacing Fuses
3.
Gently pry the fuse module from the power block (
Ç
) and pull it from the enclosure (
É
).
4.
Remove and replace both fuses on the fuse module.
CAUTION:
Replace the fuses with F2 AH 240V fuses only.
5.
Slide the fuse module into the power block and snap it into position (
c
).
6.
Snap the cover back into place on the power block.
7.
Restore power.
JMP 9600 Media Player • Mounting and Maintenance
103
