Mounting and
Maintenance
This section details the following JMP 9600 Media Player procedures:
•
Mounting the Media Player
•
Cleaning the Air Filters
•
Changing Fuses
•
Battery Precautions
Mounting the Media Player
The JMP 9600 Media Player is housed in a rack-mountable, 2U high
metal enclosure. It can
be set on a tabletop or installed in a standard 19-inch wide rack.
Ventilation Guidelines
NOTE:
When installing multiple JMP 9600 units in an equipment rack or other
enclosed area, it is highly recommended that the space be equipped with an
active cool air intake and warm air exhaust system.
To allow sufficient ventilation and cooling, consider the following:
•
Maintain a clear space at all times at the sides (2 inches [51 mm]) and rear (6 inches
[152 mm]) of the player. This clear space must also allow vertical air movement. You can
run cables in this space but dress the cables clear of any ventilation holes.
•
Keep the front of the player clear of obstructions at all times.
•
Do not impede the air flow into and out of the unit by covering the ventilation holes.
These requirements are usually met by any typical 19-inch rack mount environment.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient location.
Rack Mounting
UL guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
media player into a rack.
1.
Elevated operating ambient temperature —
If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be greater
than room ambient. Therefore, consider installing the equipment in an environment
compatible with the maximum ambient temperature specified by Extron (Tma = 104 °F
[+40 °C]).
JMP 9600 Media Player • Mounting and Maintenance
100
