Extron electronics DVS 605, User Manual, Page: 97 / 133

DVS 605 • Product Configuration Software 89
Input gain
The Input Gain fader (see figure 63 ,
5
on the previous page) can be applied to
analog inputs. It has a gain range of -53 dB to +24 dB. Adjustments are applied in 0.1
dB increments. The default setting is 0.0 dB. The current
Gain
level (
4
) for each input is
displayed to the right of the corresponding Audio Format drop-down menu.
NOTE:
•
Analog input gain adjustment applies only to analog signals. The Input Gain fader
is available for analog gain only when the audio format is set to Analog ,
LPCM-2Ch Auto , or Multi-Ch Auto .
• Adjustments made to the input gain do not affect digital audio.
To adjust the fader level:
1. In the
AV Controls
panel select the desired Input (
2
).
2. If the audio input format for inputs 1 and 2 is set to Analog , or for inputs 3-5, is set
to LPCM-2Ch Auto or Multi-Ch Auto , adjust the level using any of the following
methods:
•
Click and drag the fader handle to the desired level (
5
).
• Press the < Up Arrow > or < Down Arrow > key to respectively increase or decrease
the level in 1 dB increments.
• Press the < Page Up > or < Page Down > key to respectively increase or decrease the
level in 5 dB increments.
• Click in the level text field below the fader (
6
) and enter a new value. Then, press
the < Enter > or < Tab > key to apply the change.
Output Configuration
In this panel (
7
) the analog audio output volume (range -110 dB to 0dB) can be set, audio
format (stereo or dual mono) can be selected. An audio delay (from 0-255 milliseconds) can
also be set.
To adjust the analog audio volume use any of the following methods:
• Click and drag the fader handle (
8
) to the desired level.
• Press the < Up Arrow > or < Down Arrow > key to respectively increase or decrease the
level in 1 dB increments.
• Press the < Page Up > or < Page Down > key to respectively increase or decrease the
level in 5 dB increments.
•
Click in the level text field below the fader (
9
) and enter a new value. Then, press the
< Enter > or < Tab > key to apply the change.
To select the audio format click the Stereo or Dual Mono radio button (
¢
) as desired.
To set the audio delay use any of the following methods:
• Press the < Up Arrow > or < Down Arrow > key to respectively increase or decrease the
level in 1 ms increments.
•
Click in the level text field below the fader (
£
) and enter a new value. Then, press the
< Enter > or < Tab > key to apply the change.