DVS 605 • Product Configuration Software
70
5.
In the
Open Backup File
window, browse to where the saved backup configuration is
stored.
6.
Select the applicable configuration file (with a .extz extension) and click
Open
.
7.
On the
Restore This Device
dialog box, click
Restore
,
3
on the
previous page) to upload the file to the connected DVS 605.
8.
The window closes after restoring, and a confirmation pop-up is shown briefly to
indicate the process is complete.
To restore a configuration to multiple devices:
1.
Connect to the DVS 605 device via LAN. Ensure the receiving devices are also
connected via LAN to the same network.
2.
Select
Restore...
and then
Restore To Multiple Devices
from the
Device
drop-
down menu. A
Restore To Multiple Devices
dialog box opens. In this box devices
can be added to the list to have configurations restored.
To add devices to the restore target list:
a.
In the
TCP/IP
1
), enter the IP address, password, and Telnet
details in the appropriate fields for a desired target device.
NOTE:
The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset,
the passwords convert to the default, which is no password.
b.
Click
Add
(
2
). The list is populated with the device details
c.
Repeat the above steps for each desired target device.
1
2
3
4
Figure 44.
Restore to Multiple Devices Dialog Box
Once the list is completed, targets can be selected for deployment. As default, all targets
are preselected for deployment and have a check mark to the left of the device details list.
NOTE:
PCS verifies the correct DVS 605 model, IP address, Telnet port, and device
administrator password for each device in the list upon restoring the configuration.
PCS does not push the configuration to the device if one of the above criteria is not
valid and this is reflected in the
Status
column. The user may need to click the
Edit
logo to correct the settings if needed. In addition if a device is not connected, not
powered or turned off, a
Device not found
status is returned.
44
Summary of Contents for DVS 605
Page 6: ......