Extron electronics DVS 605, User Manual, Page: 82 / 133

DVS 605 • Product Configuration Software 74
AV Controls Panel
The AV Controls panel can be used to switch inputs, set breakaway audio, enable or
disable PIP, view active input and output status, start an Auto-Image instance, freeze the
displayed image, and mute or unmute video and audio signals.
Included in the panel is a summary of the current active input and output status, including
signal format and HDCP status, as well as AFL status.
NOTE: This panel can be hidden or revealed on any page by clicking on the arrow
button on the top right of the panel.
1
2
3
4
5 6
7
Figure 49. AV Controls Panel
NOTE:
An open lock icon indicates that an input or output is not HDCP-encrypted. A
closed lock with a check mark icon indicates an input or output is HDCP-encrypted.
AV Inputs buttons
Click an AV Input button (1-5) (see figure 49,
1
) to select that input. As the new input is
selected, the summary within the panel changes to reflect the new input and output status.
NOTE: The signal status indicators on the AV input buttons (
1
) display green when a
signal is present on the corresponding input or gray when there is no signal present.
• Select the Breakaway Audio checkbox to allow audio from another input source to be
active. This option is not available when PIP is enabled.
• Select the PIP Enable checkbox (
2
) to enable the Picture-In-Picture feature for the
selected active input.
•
Select the Audio Follows PIP checkbox (
3
) to allow the audio to follow the PIP
output.
• Select the Swap button (
4
) to swap the output from the Main Input source to the PIP
input.
NOTE: Audio Follows PIP checkbox and the Swap buttons are only available when
the PIP Enable checkbox is selected (PIP enabled).
49