Extron electronics DVS 605, User Manual, Page: 71 / 133

DVS 605 • Product Configuration Software 63
To edit communication settings from the Device Discovery panel:
1. In the
Device Discovery
panel, click the Edit button of the desired device. The
Communication Settings
dialog box opens.
1
2 3 4
0.0.0.0
Figure 32. Communications Settings Dialog Box
2. Enter the relevant details for each field or select the DHCP checkbox (see figure 32,
1
.
See Ethernet Settings on page 118 for configuration details).
3. Finalize the settings in one of the following ways:
• Click the Apply button (
2
) to accept the changes and return to the
Device
Discovery
panel.
• Click the Apply and Connect button (
3
) to accept the changes and connect to
the selected device. A new device configuration tab opens.
•
Click the Cancel button (
4
) to cancel any pending changes and return to the
Device Discovery panel.
TCP/IP Panel
The TCP/IP panel contains a means of connecting to a specific (IP address known) device
through Ethernet.
1
2
3
4
192.168.254.254
Figure 33. TCP/IP Panel
1. Click the TCP/IP tab.
2.
In the IP Address field (see figure 33,
1
), enter the IP address of the desired device.
3. Enter the device password in the Password field (
2
).
NOTES:
• The factory configured passwords for all accounts on this device have been set
to the device serial number.
•
If the device is reset back to default settings, there will be no password. New
passwords need to be configured to secure the device (see
Password Page
on page 121).
• Check the Show Characters checkbox to have the password characters
visible when entering them.
32
33