Extron electronics DVS 605, User Manual, Page: 95 / 133

DVS 605 • Product Configuration Software 87
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following:
• Click the Auto-Image button (see figure 60 ,
5
on the previous page) to perform a
one-time Auto-Image.
•
Click the Auto-Image & Fill button (
6
) to perform a one-time Auto-Image and fill
the entire video output (ignores aspect ratio settings).
• Click the Auto-Image & Follow button (
7
) to perform a one-time Auto-Image and to
maintain the aspect ratio of the input signal (ignores aspect ratio settings).
For the PIP window (see figure 61,
1
), adjustments can be made automatically to preset
positions within the main window, or can be adjusted manually.
To adjust the PIP window position automatically,
click the small image representing the
desired position (
2
, top left, top right, bottom left, and bottom right). The PIP image shifts
to the selected position.
1
2
3
2
2 2
Figure 61. PIP Window Position
To adjust the PIP window position manually,
click and drag the image (
3
) to a desired
position. When satisfied with the position, release the image.
To adjust the size and position graphically, numerically, or automatically, follow the
steps as given above for the main window (see figure 60 ,
4
,
5
,
6
,
7
on the previous
page).
Any PIP settings can be saved as a PIP preset (
8
) to be recalled later. To do this:
1. Click the PIP slot drop-down menu (see figure 62,
1
) and select the desired slot.
2. Click Save PIP (
3
). The preset is saved for later recall.
1
2 3
4
Figure 62. Saving or Recalling a PIP Preset
The PIP preset can be renamed as appropriate by clicking on the Edit button (
4
), and
entering the desired name.
Each preset name can be reset to the default setting. To do this, click the
Save PIP drop-
down menu (
3
) and select the Restore to Defaults setting.
Each preset can be recalled with or without inputs (default recall). To recall with inputs click
the Recall drop-down menu (
2
) and choose Recall with Inputs .
61
62