DVS 605 • SIS Communication and Control
52
Command
ASCII Command
(host to scaler
)
Response
(scaler to host
)
Additional Description
Advanced Configuration
Test pattern
Set test pattern
EX2)
TEST
}
Test
X2)]
Set the test pattern to
X2)
.
View test pattern
E
TEST
}
X2)]
View the current test pattern
X2)
.
KEY:
X2)
= Test patterns:
0
= off (default)
4
= crosshatch
8
= ramp
12
=
1.85
aspect ratio
1
= crop
5
= 4x4 crosshatch
9
= white field
13
=
2.35
aspect ratio
2
= alternating pixels
6
= color bars
10
=
1.33
aspect ratio
14
= blue mode
3
= alternating lines
7
= grayscale
11
=
1.78
aspect ratio
Freeze
Freeze all windows
1F
Frz1
]
Freeze Main and PIP input windows.
Freeze only MAIN
window
2F
Frz2
]
Freezes Main input window.
Freeze only PIP window
3F
Frz3
]
Freeze PIP input window.
Disable
0F
Frz0
]
Unfreeze all windows.
View
F
X5@]
Show the freeze status
X5@
.
KEY:
X5@
= Freeze status:
1
= all frozen,
2
= Main frozen,
3
= PIP frozen,
0
= all unfrozen (default)
Auto memories (per input)
Enable
EX!
*1AMEM
}
Amem
X!
*1
]
Set auto memory on. Previous settings for
incoming signal are auto recalled.
Disable
EX!
*0AMEM
}
Amem
X!
*0
]
Set auto memory off. Manual recall of input
presets needed to configure input.
View setting
EX!
AMEM
}
X(]
View current auto memory for
X!
.
KEY:
X!
= Input selection:
1
to
5
X(
= Enable or disable:
0
= off or disable,
1
= on or enable (default)
Input aspect ratio (per input)
Enable Fill mode
EX!
*1ASPR
}
Aspr
X!
*1
]
Sets input
X!
to always fill the entire raster
(default).
Enable Follow mode
EX!
*2ASPR
}
Aspr
X!
*2
]
Sets input
X!
to preserve its native aspect.
View aspect setting
EX!
ASPR
}
X2(]
View aspect ratio setting for input
X!
.
KEY:
X!
= Input selection:
1
to
5
X2(
= Aspect ratio:
1
= Fill: each input rate automatically fills the entire output raster (default)
2
= Follow: each input rate is displayed with its native aspect ratio
Auto switch mode
Disable
E
0AUSW
}
Ausw0
]
Manual switching only (default).
Priority to highest active
E
1AUSW
}
Ausw1
]
Gives priority to the highest numbered active
input.
Priority to lowest active
E
2AUSW
}
Ausw2
]
Gives priority to the lowest numbered active input.
View setting
E
AUSW
}
X3&]
View the current auto switch mode.
KEY:
X3&
= Auto switch mode:
0
= disable (default),
1
= priority to highest numbered input,
2
= priority to lowest numbered input.
Summary of Contents for DVS 605
Page 6: ......