DVS 605 • SIS Communication and Control
48
Command
ASCII Command
(host to scaler
)
Response
(scaler to host
)
Additional Description
Output Configuration
Output scaler rate
Set output rate
EX1(
RATE
}
Rate
X1(]
Select output resolution and refresh rate.
View output rate
E
RATE
}
X1(]
Show selected output rate.
KEY:
X1(
= Scaler resolution/EDID emulation: (see the EDID table,
Output polarity (valid when VGA format is set to RGBHV)
Set polarity
EX2!
OPOL
}
Opol
X2!]
Set polarity for VGA RGBHV ouput.
View polarity setting
E
OPOL
}
X2!]
Show current output polarity.
KEY:
X2!
= Output polarity:
0
= H-/V- (default),
1
= H-/V+,
2
= H+/V-,
3
= H+/V+
VGA output sync format
Set format
EX2@
OSYN
}
Osyn
X2@]
Set output sync format of the VGA output.
View sync setting
E
OSYN
}
X2@]
Show current output sync format.
KEY:
X2@
= Output sync format:
0
= RGBHV (default),
1
= RGBS,
2
= RGsB,
3
= Y, R-Y, B-Y bi-level,
4
= Y, R-Y, B-Y tri-level
HDMI output format
Set format
EX3^
VTPO
}
Vtpo
X3^]
Set HDMI output color space and format
X3^
.
View setting
E
VTPO
}
X3^]
Show current HDMI format.
KEY:
X3^
= HDMI output format:
0
= Auto (based on sink EDID), default;
1
= DVI,
2
= HDMI 444 RGB,
3
= HDMI 444 YUV “FULL”,
4
= HDMI 444 YUV “LIMITED”,
5
= HDMI 422 YUV “FULL”,
6
= HDMI 422 YUV “LIMITED”
.
Power save mode
Power save off
E
0PSAV
}
Psav0
]
DVS runs in full power mode (default).
Power save on
E
1PSAV
}
Psav1
]
DVS enters low power mode.
E
0PSAV
}
command or a unit power cycle exits
PSAV
mode.
View setting
E
PSAV
}
X4%]
View power save status.
KEY:
X4%
= Power save mode:
0
= full power mode (default),
1
= low power state
Screen saver mode (action that takes place when no signal is detected on the selected input)
Set mode
E
M
X3)
SSAV
}
SsavM
X3)]
Set the screen saver mode to
X3)
(default:
1
= black).
View mode
E
MSSAV
}
X3)]
View the current screen saver mode.
Set sync timeout
duration
E
T
X2%
SSAV
}
SsavT
X2%]
Set sync timeout duration to
X2%
seconds
(default:
501
= never).
View sync timeout
duration
E
TSSAV
}
X2%]
View sync timeout duration
X2%
.
View screen saver status
E
SSSAV
}
X4^]
View the screen saver status
X4^
.
KEY:
X2%
= On-screen menu time-out: (default =
3
seconds), output sync time-out (default =
501
- never)
0
= OSD never displayed/output sync is instantly disabled with no active input,
1
to
500
, in
1
second increments,
501
= OSD never times out/output sync never times out
X3)
= Screen saver mode:
1
= Black screen (default),
2
= Blue screen with OSD text
X4^
= Screen saver status:
0
= Active input detected, timer not running,
1
= No active input, timer is running, output sync
still active,
2
= No active input, timer has expired, output sync disabled
Summary of Contents for DVS 605
Page 6: ......