DVS 605 • Operation
22
Audio Configuration (All Models)
Audio Configuration
allows the user to set analog audio volume level (-100 dB to 0 dB
range), turn audio mute on or off, adjust input gain and attenuation levels (–53 dB to +24 dB
range) for the current analog input. It also allows selection of an input audio format (none,
analog, 2-channel digital, full digital, 2-channel auto, or full auto), and the audio output type
(stereo or dual mono), which can be adjusted for each input.
NOTES:
•
Volume level and input gain and attenuation adjustments are available only on
audio models, analog audio (DVS 605 A and DVS 605 AD). Gain and attenuation
adjustments do not affect the digital audio.
•
For analog inputs 1 and 2, the choice of input audio format is analog or none.
•
For non-audio models format, selection for inputs 3 through 5 is limited to
none, 2-channel digital, or full digital.
•
For inputs 3, 4, and 5, when in auto mode, digital audio is used when
present. If no digital audio is present it defaults to analog audio.
Next
IN4 FORMAT
DIGITAL
Rotate either to
select input
audio format.
Rotate either to
set volume level.
VOLUME
-75dB
AUDIO MUTE
<OFF> ON
IN4 GAIN/ATT
0 dB
Rotate either to
turn audio mute
on or off.
Rotate either to
set gain and
attenuation level.
AUDIO
CONFIG
AUDIO OUTPUT
STEREO
Rotate either to
select audio
output format.
Next
Next
Next
Next
Next
Figure 17.
Audio Configuration Menu
Use the
Next
button to scroll to the applicable submenu, and use both
Adjust
knobs
(
[ {
) to change the settings as needed.
Input Audio Format
Description
None
All audio for the input is muted: 128 byte EDID (VGA/DVI) is
presented to the source.
Analog
5-pole captive screw connector is used for audio input: 128 byte
EDID (VGA/DVI) is presented to the source.
NOTE:
DVS 605 analog audio outputs are active only if analog or PCM audio is
detected on HDMI inputs 3, 4, and 5.
2-channel digital
256 byte EDID (HDMI) is presented to the source requesting
2CH PCM audio.
Full digital
256 byte EDID (HDMI) is presented to the source allowing for all
digital audio formats.
2-channel auto
256 byte EDID (HDMI) is presented to the source requesting
2CH PCM audio.
If digital audio is not present this automatically defaults to the
5-pole captive screw analog audio input.
Full auto
256 byte EDID (HDMI) is presented to the source allowing for all
digital audio formats.
If digital audio is not present this automatically defaults to the
5-pole captive screw analog audio input.
Figure 18.
Audio Input Format Descriptions
17
18
Summary of Contents for DVS 605
Page 6: ......