Extron electronics DVS 605, User Manual, Page: 22 / 133

DVS 605 • Operation 14
Menu Overview
After start-up, when no adjustments are actively being made, the “default cycle” appears on
the LCD. The screens cycle between the number and video format of the active input and
the current output resolution.
Pressing the
Menu button once brings up the first of eight main (top level) menus, as shown
in figure 9. Each successive press of the Menu button goes to the next main menu.
Menu
Menu
Menu
Menu
Menu Menu
USER
PRESETS
INPUT
CONFIG
PICTURE
CONTROL
OUTPUT
CONFIG
AUDIO
CONFIG
ADVANCED
CONFIG
VIEW COMM
SETTINGS
EXIT MENU?
PRESS NEXT
Menu
Menu
Menu
Menu
Next Next
2 sec.
2
sec.
Default Display Cycle
IN RGBHV
#1 640x480
IN 31.47 kHz
#1 59.94 Hz
OUTPUT
720p@60
2 sec.
Figure 9. Top Level Menus
A fourth default cycle menu appears only when genlock is enabled (see Genlock/AFL
modes on page 20 for details).
NOTE: From any menu or submenu, after 20 seconds of inactivity the DVS saves all
adjustment settings and times out to the default cycle.
The
flowchart
shown on the next page provides an overview of the complete menu
system, with configuration submenus and the items for each setting. In the flow charts, the
use of
x
, (for example,
in x
or
In x
) indicates an input number.
Use the Menu button to scroll between top level menus and press Next to enter the
submenus.
NOTE:
If no signal is present on the currently selected input, NO SIGNAL appears in
place of the input type. For example, INPUT 4 NO SIGNAL .
Details of each of the menus are on subsequent pages after the main flow chart.
9