Extron electronics DVS 605, User Manual, Page: 84 / 133

DVS 605 • Product Configuration Software 76
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, audio configuration, and general
device settings. Each page is accessible via the global navigation bar.
Figure 50. Global Navigation Bar
Input and Output Configuration Page
Click the Input/Output Config icon to open this page. It contains panels for input
configuration and output configuration.
Input Configuration panel
The Input Configuration panel consists of user configurable settings for each input.
These include input naming, Signal Type , Aspect Ratio , automatic Auto-Image , Auto
Memory , HDCP Authorized status, and Film Detect .
1
2
3
4
5 6 7
Figure 51. Input Configuration panel
Input naming
To name an input, click in the relevant input name field (see figure 51,
1
) and enter an
applicable name (up to 16 characters).
Signal type
From the
Signal Type
drop-down menu (
2
), select the signal type for
inputs 1 and 2 from Auto Detect (default) , RGB , YUV-Auto , RGBcvS ,
S-Video , and Composite .
For inputs 3 to 5, HDMI/DVI is the only available signal type.
Aspect ratio
From the Aspect Ratio drop-down menu (
3
) select Fill or Follow .
• Fill — Scales the input signal to fill the entire video output.
•
Follow — Follows the signal aspect ratio, with respect to the current output resolution
setting. Black letter box or pillar box bars may be applied for aspect ratio compensation.
50
51