DVS 605 • SIS Communication and Control
53
Command
ASCII Command
(host to scaler
)
Response
(scaler to host
)
Additional Description
Video effect
Cut
E
0SWEF
}
Swef0
]
Sets the switch to cut.
Dissolve
E
1SWEF
}
Swef1
]
Sets the switch to dissolve.
View setting
E
SWEF
}
0
]
(or
1
]
)
View setting (
0
= cut,
1
= dissolve [default]).
Effect duration
Set dissolve duration
EX3%
EDUR
}
Edur
X3%]
Sets the effect duration to tenths of seconds (range
2
=
0.2
to
50
=
5.0
seconds. Default is
3
=
0.3
seconds).
View duration
E
EDUR
}
X3%]
View effect duration.
KEY:
X3%
= Effect duration: from
2
to
50
, in 0.1 second steps (where
2
= 0.2 seconds,
50
= 5.0 seconds),
default =
3
(0.3 seconds)
Front panel security lockout (Executive Mode)
Enable Executive
mode 1
1X
Exe1
]
Lock entire front panel.
Enable Executive
mode 2
2X
Exe2
]
Limited front panel adjustments (input selection,
PIP/Swap, and Auto-Image) can be made.
Disable Executive mode
0X
Exe0
]
Unlock front panel controls. All front panel
adjustments can be made.
View Executive mode
status
X
0
]
(or)
1
]
(or)
2
]
View the current status:
0
= unlocked [default],
1
= on, complete,
2
= on, limited adjustments.
Overscan mode (applies only to SMPTE [NTSC, PAL, 480p, 576p, 720p, 1080i, 1080p] input rates)
Set value
EX#
*
X2*
OSCN
}
Oscn
X#
*
X2*]
Set input format
X#
to overscan mode
X2*
.
View status
EX#
OSCN
}
X2*]
Show overscan mode
X2*
for input format
X#
.
KEY:
X#
= Input video format:
1
= RGB,
2
= YUV auto,
3
= RGBcvS,
4
= S-video,
5
= composite,
6
= DVI/HDMI (only available for inputs 3, 4, and 5),
X2*
= Overscan (applied to SMPTE [NTSC/PAL - 480p to 1080p] input rates),
0
= 0.0% (default for RGB/HDMI),
1
= 2.5% (default for YUV, RGBcvS, S-video composite).
HDCP notification (green screen and message)
Enable notification
E
N1HDCP
}
HdcpN1
]
Enable the HDCP notification (default).
Disable notification
E
N0HDCP
}
HdcpN0
]
Disable the HDCP notification. Instead mute
output.
Query notification
E
NHDCP
}
X(]
Query the HDCP notification.
KEY:
X(
= Enable or disable:
0
= off or disable,
1
= on or enable
HDCP status (valid for HDMI inputs and HDMI output only)
Query input
E
I
X!
HDCP
}
Verbose mode 2/3 response
X3#]
HdcpI
X!
*
X3#]
Query the HDCP status of the current input
X!
.
Query output
E
O2HDCP
}
Verbose mode 2/3 response
X3#]
HdcpO2*
X3#]
Query the HDCP status of the HDMI output.
KEY:
X!
= Input selection:
1
to
5
X3#
= HDCP status (valid only on HDMI/DVI inputs and outputs):
0
= no sink or source detected,
1
= sink or source detected with HDCP,
2
= sink or source detected but no HDCP is present
Summary of Contents for DVS 605
Page 6: ......