manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Product Reference Manual

Share
Download
Extreme Networks Altitude 3500 Series Product Reference Manual Download Page 505

 

Altitude 3500 Series Access Point Product Reference Guide

505

AP35xx>admin(stats)> send-cfg-ap

Copies the AP35xx’s configuration to another AP35xx within the known AP table.

Syntax

Example

admin(stats)>send-cfg-ap 2

admin(stats)>

NOTE

The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN IP data, 

WAN IP data and DHCP Server parameter information.

For information on copying the access point config to another access point using the applet (GUI), see 

“Viewing Known Access Point Statistics” on page 254

.

send-cfg-ap

<idx>

Copies the AP35xx’s configuration to the AP35xxs within the known AP table. 
Mesh configuration attributes do not get copied using this command and must 
be configured manually.

Summary of Contents for Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands