manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Product Reference Manual

Share
Download
Extreme Networks Altitude 3500 Series Product Reference Manual Download Page 231

 

Altitude 3500 Series Access Point Product Reference Guide

231

C H A P T E R

7

Monitoring Statistics

The Altitude 35xx has functionality to display robust transmit and receive statistics for its WAN and 
LAN port. 

Wireless Local Area Network (WLAN) 

stats can also be displayed collectively for each enabled 

WLAN as well as individually for up to 16 specific WLANs.

Transmit and receive statistics can also be displayed for the Altitude 35xx’s 802.11a and 802.11b/g 
radios. An advanced radio statistics page is also available to display retry histograms for specific data 
packet retry information.

Associated MU stats can be displayed collectively for associated MUs and individually for specific MUs. 
An echo (ping) test is also available to ping specific MUs to assess the strength of the AP association. 

Finally, the Altitude 35xx can detect and display the properties of other APs detected within the 
Altitude 35xx radio coverage area. The type of AP detected can be displayed as well as the properties of 
individual APs. 

See the following sections for more details on viewing statistics for the Altitude 35xx:

●

Viewing WAN Statistics on page 231

●

Viewing LAN Statistics on page 234

●

Viewing Wireless Statistics on page 239

●

Viewing Radio Statistics Summary on page 243

●

Viewing MU Statistics Summary on page 248

●

Viewing the Mesh Statistics Summary on page 253

●

Viewing Known Access Point Statistics on page 254

Viewing WAN Statistics

Use the Altitude 35xx 

WAN Stats 

screen to view real-time statistics for monitoring the Altitude 35xx 

activity through its 

Wide Area Network (WAN) 

port.

The

 Information 

field of the WAN Stats screen displays basic WAN information, generated from settings 

on the WAN screen. The

 Received 

and 

Transmitted 

fields display statistics for the cumulative packets, 

bytes, and errors received and transmitted through the WAN interface since it was last enabled or the 
AP was last rebooted. The Altitude 35xx 

WAN Stats

 screen is view-only with no configurable data fields. 

Summary of Contents for Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands