Monitoring Statistics
Altitude 3500 Series Access Point Product Reference Guide
252
7
Refer to the
Errors
field to view MU retry information and statistics on packets not transmitted.
8
Click
OK
to exit the screen.
Pinging Individual MUs
The Altitude 35xx can verify its link with a Motorola MU by sending WNMP ping packets to the
associated MU. Use the
Echo Test
screen to specify a target MU and configure the parameters of the ping
test.
NOTE
An echo test initiated from the Altitude 35xx MU Stats Summary screen uses WNMP pings. Therefore,
target clients that are not Motorola MUs are unable to respond to the echo test.
To ping a specific MU to assess its connection with an Altitude 35xx:
1
Select
Status and Statistics
>
MU Stats
from the Altitude 35xx menu tree.
2
Select the
Echo Test
button from within the
MU Stats Summary
screen
3
Specify the following ping test parameters.
4
Click the
Ping
button to begin transmitting ping packets to the station address specified.
Refer to the
Number of Responses
parameter to assess the number of responses from the target MU
versus the number of pings transmitted by the Altitude 35xx. Use the ratio of packets sent versus
packets received to assess the link quality between MU and the Altitude 35xx
5
Click the
Ok
button to exit the Echo Test screen and return to the MU Stats Summary screen.
Avg Num of Retries Displays the average number of retries for the MU. The
number in black represents average retries for the last 30
seconds and the number in blue represents average
retries for the last hour.
Dropped Packets
Displays the percentage of packets the AP gave up as not
received on for the selected MU. The number in black
represents the percentage of packets for the last 30
seconds and the number in blue represents the
percentage of packets for the last hour.
% of Undecryptable
Pkts
Displays the percentage of undecryptable packets for the
MU. The number in black represents the percentage of
undecryptable packets for the last 30 seconds and the
number in blue represents the percentage of
undecryptable packets for the last hour.
Station Address
The IP address of the target MU. Refer to the
MU Stats
Summary
screen for associated MU IP address
information.
Number of ping
Specify the number of ping packets to transmit to the
target MU. The default is 100.
Packet Length
Specify the length of each data packet transmitted to the
target MU during the ping test. The default is 100 bytes.
Packet Data
Defines the data to be transmitted as part of the test.
Summary of Contents for Altitude 3500 Series
